- Crank Brother's lightest pedal
- 4 main parts are made of titanium
- Max rider weight = 200 lbs (90kg)
- Micro-platform: XC, Race
- Fully rebuildable and simple to maintain
Eggbeaters are some of the easiest-to-use clipless pedal systems around. Thanks to the four-sided wing of the Eggbeater 11, it's literally impossible to not clip in with lightning quickness as soon as the bottom of your shoe hits the pedal. The Eggbeater wing rotates either forward or backward under the pressure of your foot to quickly and smoothly engage the cleat bolted to the sole of your shoe. In addition to being quick and easy, the Crankbrothers Eggbeater 11 Pedals are exquisitely light. When it comes to mud, there isn't a better pedal on the market. Eggbeaters are made for slop. Their open design allows dirt, mud, and muck to pass right through as you engage your cleats. These Eggbeater 11 Pedals are the most recent iteration of the top-of-the-line Eggbeater 4Ti pedals. Similarly, they have titanium bodies, wings, and spindles. The spring is stainless steel for durability and consistent tension. And maybe the nicest thing is that no matter where you ride, stainless and titanium will never corrode. The brass cleats for the Crankbrothers Eggbeater 11 Pedals are small so they recess flush with the tread on the bottom of your shoes for easy walking. They're also designed for two release angles -- 15 or 20. The release angle depends on which cleat you bolt to which shoe. Crankbrothers recommends the 15 setting if you're new to clipless. Otherwise, the 20 configuration will give you greater mobility on the bike without the worry of an accidental release. Needle and cartridge bearings will keep the Eggbeater 11 Pedals spinning smoothly -- a great improvement from the old bushings. And when the time comes for an overhaul, keep in mind that nobody else's pedals are as easy to service as Crankbrothers' pedals are. Shims to protect your shoes are included as well as all the hardware you'll need for installation. Please Note: Titanium spindles are not for everyone. Crankbrothers recommends a 200lb (90kg) rider weight limit for the Eggbeater 11 Pedals. Full titanium!