hammer
It be way more funny if this said "Get Hammered".
hammer Tutorials
Properly Fit A Star Nut
The star nut is pressed into the steerer tube and allows the fork and headset components to be pulled into place in the frame’s head tube. If you have a new fork, or have just cut down the steerer...
Type: Repair Tutorial
Tips for Removing Stripped Bolts
Tips for Removing Stripped Bolts:
There are so many specialized tools for removing stripped bolts that the market for tools in this category is huge. However, most people would like to...
Type: Repair Tutorial
Remove 'Cotter Pin' Cranks from a Vintage Bike
This video will show you how to remove ‘cotter pin’ cranks.
Cotter pin cranks are generally older cranks and are found on older bikes.
The seat clamp in the video is used to hold the...
Type: Repair Tutorial
Install An External Cup Headset Without A Press
How to install an external cup bike headset without a press:
To do this project at home you will need bike grease, a piece of wood or something similar, and a hammer. The reason for using a...
Type: Repair Tutorial
Steps for Removing an Adjustable Bottom Bracket
Remove an adjustable bottom bracket:
start by first removing the cranks. A lockring on the outside of the left hand side cup is an indication that the cup and cone bottom bracket is...
Type: Repair Tutorial
Rebuild RaceFace Atlas Bike Pedals
Not only are RaceFace Atlas pedals incredibly easy to rebuild, but also really tough and light.
The first step is to use a 3mm allen to remove the spare pin form the end of the axle. Then,...
Type: Repair Tutorial
How to Install a Cane Creek Threadless Headset
The headset is a small, yet critical component that is often overlooked. In this video you’ll see how to service, adjust, and install your thread less headset.
For this, you will need a...
Company: Cane Creek Race Face Race Face
Type: Repair Tutorial
Mounting of CeramicSpeed with BB30 Bottom Brackets and Tool
CeramicSpeed bearings are hand made in Denmark from the finest quality components and special CeramicSpeed balls. Each part is designed to have the lowest friction possible and the longest...
Company: CeramicSpeed Park
Type: Repair Tutorial
DIY Remove a Fixed Gear Cog at Home without Special Tools
Today, I'll be showing you guys how to remove your fixed gear cog, but I will show you how to remove it without any special tools. Only tools you'll need is a screwdriver or some...
Type: Repair Tutorial
DIY Cut Bike Steer Tube and Tap Star Nut Down
I'm going to be trimming down my steer tube. I actually just thought this up on how to tap the star nut down without using an actual star nut tool. What I'm going to do is...
Company: Cane Creek Truvativ
Type: Repair Tutorial
How to Install a Star Nut in a Bicycle Fork
I'm going to show you how to install a star nut into your bicycle fork.
Star Nut in Fork
In order to install the star nut straight into the...
Company: Park
Type: Repair Tutorial
Cut and Resize Shimano Disc Brake Hose
Today, we are going to be cutting the hose. As you can see I installed this hose and it's huge. You can do this off the bike or on the bike, however you like. I do it on, because I...
Type: Repair Tutorial
How to Install a Threadless Headset
A headset is basically the piece that holds the fork to the frame of a bike, thereby allowing for steering. A sealed bearing headset normally has a plastic or rubber gasket to protect the insides...
Company: Cane Creek Park Race Face
Type: Repair Tutorial
How to Install a Sealed Bearing Headset/Threaded Headset/Threadless Headset
Headsets are the bike components that provide an interface between the moving forks that steer, and the head tube of the frame. There are a lot of special tools for the installation. If you...
Company: Cane Creek Chris King Origin8 Park
Type: Repair Tutorial
How to Install a Bottom Bracket
I like being thorough and bike mechanics requires a lot of attention to detail. If you don’t get it right the first time, your ride suffers. And the level of competence, time and patience can...
Type: Repair Tutorial