Box End Wrench
A double-ended tool with one end being like an open-ended wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt.
Box End Wrench Tutorials
How To Fit A Press Fit BB
How to press fit your bottom bracket:
Apply Grease to Bottom Bracket Shell Before Installing
Make sure all surfaces are nice and clean, then apply a...
Company: Hope
Type: Repair Tutorial
How to Adjust a Shimano Nexus Internal 3 Speed Hub
Today, we’re going to work on internal multi speed hubs. This is the Shimano shifter. It is the Nexus model, which is written on the body. Another way to tell that this is Shimano is that the...
Company: Shimano
Type: Repair Tutorial
DIY How to Tighten Loose Water Bottle Bosses/Rive-nuts
“I have an old CAAD 6 road frame and the lower water bottle boss on the down tube has come loose. Do you have any tips to fix it?”
Water bottle bosses are also known as rive-nuts, and they...
Type: Repair Tutorial
DIY How to Spray Paint Your Bicycle Wheel Rims
Today, I’m going to show you how to paint your rims. You’ll need a roll of masking tape, a 15mm socket set, and a plastic tire lever.
Step 1, take the 15mm socket set and take off your...
Type: Repair Tutorial
How to Install Fenders on a Bike
I'm here to show you how to install fenders on your bike. It's actually a pretty easy process, you only need a couple tools: 15 mm wrench, 10 mm wrench, 5 mm allen wrench, and 3 mm allen wrench....
Type: Repair Tutorial
Install Campagnolo Over Torque (BB30) Bottom Bracket and Cranks
In this video, we're going to show you how to fit a Campagnolo over torque bottom bracket and change set. The over torque bottom bracket is a standard BB 30 press fit. To do this job, you'll need...
Company: Park Campagnolo
Type: Repair Tutorial
Cut and Resize Shimano Disc Brake Hose
Today, we are going to be cutting the hose. As you can see I installed this hose and it's huge. You can do this off the bike or on the bike, however you like. I do it on, because I...
Type: Repair Tutorial
Replace a Fixed Gear (Fixie) or Track Bike Sprocket
If you ride a track bike or single speed bike you've only got one option when it comes to gearing, but what if you want to gear down or gear up? You have three choices....
Company: Vuelta Pista Campagnolo
Type: Repair Tutorial
How to Install a Kickstand on Your Bike Frame
There's a very small accessory on most bikes that is often overlooked but can be very important - the kickstand. Us cyclers often don't realize how handy the little pieces are until we have one...
Type: Repair Tutorial
How to Bleed Magura Hydraulic Brakes
I’ll probably repeat it a bah-jillion times but it is worth repeating: if you are bleeding hydraulic brakes, mineral oil and DOT fluid ARE NOT INTERCHANGABLE! It’s kind of like when they tell you...
Type: Repair Tutorial
How to Bleed Shimano Hydraulic Disc Brakes
Hydraulic brakes work by applying pressure to a liquid in a tube. They work by means of a piston in the lever which shoots liquid into the caliper piston which causes the brakes to clamp...
Company: Shimano
Type: Repair Tutorial
How to Install a Sealed Bearing Headset/Threaded Headset/Threadless Headset
Headsets are the bike components that provide an interface between the moving forks that steer, and the head tube of the frame. There are a lot of special tools for the installation. If you...
Company: Cane Creek Chris King Origin8 Park
Type: Repair Tutorial
How to Bleed Hayes Hydraulic Brakes
First things first: the Hayes system uses DOT 3 or DOT 4 mechanical brake fluid. DO NOT USE MINERAL OIL FOR THESE BRAKES!!!!!!!
Second, the bleed starts from the caliper up to the brake...
Company: Hayes
Type: Repair Tutorial